- AC Cut D 500 is a brass core wire made with 20% of zinc, which allows high energy for efficient performances in conical machining
- Developed for GF AgieCharmilles machines equipped with IPG or previous generator generation
- AC Cut D 500 enables machining speed of up to 20 % faster than a Brass wire
- AC Cut D 500 is particularly recommended for complex machining with large taper up to 30°
Specs
Specs
Wire | |
|---|---|
| Wire diameter (mm) |
|
| Spool / Package |
|
| Spool weight (kg) |
|
| Spool type |
|
Variants
Reference | Identifier | Wire diameter (mm) | Spool type | Spool weight (kg) | Spool / Package |
|---|---|---|---|---|---|
| 950-200-000 | AC CUT D 500 - 0.20 - 4 spools 4 kg | 0.20 | K125 | 4 | 4 |
| 950-200-001 | AC CUT D 500 - 0.20 - 2 spools 8 kg | 0.20 | K160 | 8 | 2 |
950-200-002 | AC CUT D 500 - 0.25 - 2 spools 8 kg | 0.25 | K160 | 8 | 2 |
| 950-200-003 | AC CUT D 500 - 0.25 - 1 spool 16 kg | 0.25 | K200 | 16 | 1 |
| 950-200-005 | AC CUT D 500 - 0.20 - 1 spool 8 kg | 0.20 | K160 | 8 | 1 |
| 950-200-006 | AC CUT D 500 - 0.25 - 1 spool 4 kg | 0.25 | K125 | 4 | 1 |
| 950-200-007 | AC CUT D 500 - 0.25 - 1 spool 8 kg | 0.25 | K160 | 8 | 1 |
There are no documents available for this product.