Tooling for EDM

3R-600.86-3N

Chuck for builing-in, for example in a fixture.

3R-600.84-3N

Chuck for building-in, for example in a fixture, dividing head or B-axis.

3R-651.7E-N

Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.

3R-601.7-N

Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.

3R-606.1-N

For setting angular positions and for centring Macro chucks.

3R-SP15055

Cast chuck with ground flange for installation in fixture/plate.

3R-651.75E-N

Hardened and milled with clearance holes for eight fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.

3R-600.24-S

Cast chuck with ground back face for mounting on the machine spindle with 3R-A11489 or in a fixture on the machine table.

3R-600.28-S

Cast chuck with ground back face for mounting on the machine spindle. Also suitable in a fixture on the machine table or with adapterplate 3R-A26488.

3R-606-N

Check mandrel with ground C-reference for setting Macro chucks.

90412.1X

Pneumatic added-on chuck with swivel surrounding unit.

3R-SP24460

Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.