Tooling for EDM

3R-601.3

Hardened with 3Refix holes, flushing connection and clearance holes for six fixing screws.

3R-651.70-P

Unhardened palett with reference element 3R-651.7-P.

3R-612.54-A

Suitable for some Macro chucks with drawbar 3R-605.1.

3R-608.31E

Unhardened with 3Refix holes and four M6 threads. Designed to be mounted on 3R-601.3 or 3R-601.52.

3R-651.75E-P

Hardened and milled with clearance holes for eight fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.

3R-US90-601

Fixed index positions at 0, 30, 45, 60 and 90 degrees. Other angles are set with a sine rule.

3R-601.116-75PA

Unhardened palett with reference element 3R-651.75-P.

3R-601.52

Hardened, with 3Refix holes and clearance holes for ten fixing screws.

3R-651.70-XS

Unhardened palett with reference element 3R-651.7-XS.

3R-612.54-S

Suitable for some Macro chucks with drawbar 3R-605.2.

3R-612.116-A

Suitable for some Macro chucks with drawbar 3R-605.1*. Note: Only suitable for Ø116 mm pallets.

3R-628.31-S

3R-605.1 Drawbar, long x4 3R-605.2 Drawbar, short x2 3R-610.21-S Manual table chuck x1 3R-651.7-S Ref. element, 54x54 mm x12 3R-656.1 Check ruler x1 3R-658.1-S Spacer plate 54x54 mm x2 3R-658.4-S Holder 54x54 mm x4 3R-658.2-S Holder 54x54 mm x4