Tooling for EDM

3R-614-04

Mainly for MacroCombi, Ø10 3Refix mandrels and MacroMagnum chuks.

3R-MFT4x12E

For mounting electrode blanks.

3R-PI4.5x20E

For mounting electrode blanks

3R-PI4.5x25E

For mounting electrode blanks.

3R-333-T20

For screws 3R-PI4.5x20E and 3R-PI4.5x25E.

3R-404-25

For soldering electrode blanks on 3R-491E or 3R-SP19269. .

3R-650-8-JR

For storing MacroJunior holders in 3R-650/8x5 and 3R-150/5.

90027.02

Intended for MacroCombi chucks. Can also be used as a cover for unused chucks.

3R-SSP115-BASE

For both pneumatic and manual chucks. This stand alone unit in combination with individual drawbars or drawbar kits, able to cover MacroJunior, Macro, MacroMagnum and Dynafix. Note: Require drawbars with bayonet interface similar to 3R-605.1.

3R-TXXXX

Taper attachment for mounting chucks in taper spindles. Note: Manufactured on request. State machine type, taper (1), drawbar thread (2) and which 3R chuck is to be mounted.

3R-468.31-S

3R-405.11 Drawbar, MacroJunior x5 3R-405.16 Drawbar, Macro x5 3R-460.31-5 Manual table chuck, Macro x1 3R-465-L Holder, MacroJunior x2 3R-465-V Holder, MacroJunior x2 3R-491 Holder, MacroJunior x30 3R-651.7-S Reference element, 54x54 mm, Macro x6 3R-656.1 Check ruler, Macro x1 3R-658.1-S Intermediate plate, 54x54 mm, Macro x2 3R-658.2-S Holder, 54x54 mm, Macro x2 3R-658.4-S Holder, 54x54 mm, Macro x2 3R-333-T20 Screwdriver, TORX x1 3R-PI4.5x20 TORX screw x100 3R-614-04 Torque wrench, 4 Nm x1

3R-A21944

For vertical or horizontal mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on the machine table. Intended for milling. Note: Chuck to be ordered separately.