Tooling for EDM

3R-863.25-10

With pre-programmed unique identity, designed for MacroJunior 25 mm, 3R-491E.

3R-611.46

Unit for operation of pneumatic chucks. Three positions – open/neutral/closed.

3R-321-4x90º

Hydraulic chuck for mounting on machine spindle with Midi system.

3R-SSP115-Jun

Add-on kit for 3R-SSP115-BASE.

3R-321.2-4x90

Hydraulic chuck with set screws, for mounting on a lathe taper.

3R-321.46

Manual hydraulic chuck for vertical or horizontal mounting on the machine table.

3R-1.321-HS

Electric spindle for tubular electrodes in collets ER16.

3R-322-25S

Holder with hardened reference part and unhardened electrode mounting part.

3R-A19724

For mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on machine table.Note: Chuck to be ordered separately.

3R-322-100

Holder with hardened reference part and unhardened electrode mounting part.

3R-463-5033

For mounting MacroJunior holders in the Mini system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.

3R-321.5

Hydraulic chuck for mounting on machine spindle with 3R-A3620.