Tooling for parts production

S_230_150

For GPS 70 pneumatic chucks C 188 720 and C 198 700.

S_660_000

For GPS 70 manual chucks C 188 300 and C 530 210.

S_230_510

For GPS120 maual chucks C 188 320 and C 530 310

C_960_500

Manual control unit for clamping and releasing pneumatic chucks.

C_695_176

Chip protection ring for GPS120 chucks when used manually with GPS 70 pallets C 695 050.

C_846_360

For the axial and concentric XY alignment of the GPS 70/120 chuck.

S_230_100

For GPS 70/120 pneumatic chucks C 188 700 and C 188 770.

3R-903-20.235

Bushes of hardened spring steel 54 HRC. Outside diameter 23.5mm

3R-901-20RS

Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.

C_531_000

Sealing of unused bores.

3R-901-20E

Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.

3R-936-60.38

Reference tables of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as well as M12 tapped mounting holes with 50x50 mm modular spacing. Note: Customised reference tables can be made to order. Note: Hardened reference tables (650-700 HB) can be made to order.