Tooling for parts production

3R-SP7359

Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.

3R-695.2-142RS

Note: In automation the gripper has to grip on the pallet and not on the drawbar.

3R-699.20-142D

The pallet can be flipped over to gain access from rear side.

3R-SP31380-RS

Intended to fit cut tools with Ø20 mm. Also adapted to fit System 3R Mini electrode holders with Ø20 mm.

3R-699.20-110D

The pallet can be flipped over to gain access from rear side.

3R-SP30752

From Matrix 142 to Capto C6 system.

3R-SP30997

From Matrix 142 to Macro system.

3R-695.2-185RS

Note: In automation the gripper has to grip on the pallet and not on the drawbar.

3R-SP29998

From Matrix 185 into Macro system. Chuck adapter with built-in Macro chuck.

3R-699.40-142D

The pallet can be flipped over to gain access from rear side.

3R-696.1-185

For setting flatness and angular positions. Ground hole for centering.

3R-696.1-142

For setting flatness and angular positions. Ground hole for centering.