Tooling for wire EDM

3R-602.27

Manual chuck with lever for Macro holder.

3R-600.23RS

Manual chuck with mounting flange for Macro holder. Designed for permanent mounting.

3R-602.26

Manual chuck for Macro holder.

90809.02

Chuck for MacroMagnum holder. For permanent mounting on the machine spindle or table. Note: Master 3R-606.1 or 3R-686.1-HD required at installation.

90945.01

Pneumatic chuck for permanent mounting on the machine table.

3R-602.4.1

Pneumatic chuck for Macro holder.

3R-201.5

Mounts directly on the machine table. For vertical mounting of a Macro chuck or short reference element in the machine.

3R-60.360X

Compact Rotary Indexing Tables with pneumatic Macro chuck. Indexing 0-360° with smallest step 0.001°. Air connections for open/close, as well as turbo-locking/air-blast cleaning. Note: The units are controlled by the machine. The mark and type of the machine must therefore be stated when ordering.

D-30206

Pneumatic built-in chucks for Macro holders. Can also be used in milling and grinding operations without high cutting forces.

3R-217-1

Manual Macro chuck. For vertical or horizontal mounting on the machine table, or alternatively the WEDM system with the aid of 3R-SP6435.

3R-SP6435

Adapter element for mounting 3R-217-1 in the WEDM system.

D-30229-3

Rotation table with Matrix 185 interface. Note: The units are controlled by the machine. The mark and type of the machine must therefore be stated when ordering.